No. 38-A, T. P. Street, 6th Kumbharwada Opposite Shop No. 130, Near Alankar Cinema, Mumbai - 400004, Maharashtra, India.

+91 9819881321


Manifold Pipe Solution Inc is a leading stainless steel 347 seamless tubes Manufacturer in India. Stainless steel seamless tubes are made by extrusion process by passing molten metal through die to get shape of tubes. These tubes are made by steam or electric resistant welding process. There is alot of difference in manufacturing stainless steel seamless tubes. These tubes has good outer diameter with no mark of joints, which increses the beauty of these seamless tubes.

The seamless steel tubes manufacturing process starts with a solid, round steel billet. This billet is then warmed to great temperatures and extended and pulled over a frame until the point that it takes the state of an empty tube.

The best preferred standpoint of consistent steel tubes is their expanded capacity to withstand pressure. The weakest point in a welded stainless steel 347 seamless is the welded seam. But since a consistent steel tubes has not been welded, it doesn’t have that seam, making it similarly solid around the whole outline of the tubes. It is likewise considerably simpler to decide pressure calculations without being required to take weld quality into consideration.

Although stainless steel 347 seamless can once in a while be more costly than welded tubes, this expanded capacity to withstand weight enables you to utilize tubes that are more slender and lighter, which can help lower down your expenses.

Being a leading stainless steel 347 seamless Supplier in India, we manufacture the tubes to make it more realible even though seamless steel tubes can sometimes be more expensive than other forms of steel tubes.

This is because its under loading has been great. Empty tubes should dependably support its own weight, however when a seamless tube is loaded with material or under load it should support that weight also. Tubes failures and leaks in welded tubes usually occur at the welded seam. But since consistent tubes doesn’t have that seam, it isn’t liable to those failures.

An additional benefit of stainless steel 347 seamless tubes Manufacturer is that they perform well in harsh conditions, which means that they can be used in unessential factors to the framing process, it can never be as round as seamless steel pipe.

Stainless steel 347 seamless tubes is a seamless expulsion of the compound, implying that it will have a round cross area that you can rely on, which is useful when you’re introducing tubes or including fittings.

Thus, we are leading stainless steel 347 seamless tubes Supplier, manufacturer in India.

Stainless Steel 304L Seamless Tubes & 304L Seamless Pipe/ Tube in Our Stockyard

Stainless Steel 347 Seamless Pipe/ Tube in Our Stockyard

Stainless Steel 347 Seamless Tubes Specifications:

Stainless Steel 347 Seamless Tubes are needed where heavy wall thickness is combined with small diameters making forming of plate or strip complicated and where the standard specifically specifies seamless.

Stainless Steel 347 Seamless Tubes have good to excellent corrosion resistance and high quality surface finish characteristics, and are for these reasons used in demanding applications such as food processing and pharmaceutical production, for the conveyance and processing of liquids, gases and semi-solids in solution.

347 Stainless SteelChemical Composition

C 0.08
Si 1.00
Mn 2.00
P 0.045
S 0.030
Cr 17.0-19.0
Ni 9.00-13.00
Others Nb+Ta 10xCmin

347 Stainless SteelMechanical Properties

Yield Strength 0.2% Offset Ultimate Tensile Strength Elongation
30,000psi, 205Mpa 75,000psi, 515Mpa 40%

The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as nominal diameter, size, and nominal size.

@ 2017 Manifold Pipe Solution Inc. All Rights Reserved.